26
RECORDING
The analog signals from the 6.1 CH DIRECT inputs as well as the digital signals from the coaxial or optical
digital input can be heard but cannot be recorded.
The volume, tone (bass, treble) settings,etc. have no effect on the recording signals.
ENGLISH
Start recording on the component
connected to TAPE MONITOR.
2
Select the desired input as recording source
except for TAPE MONITOR.
1
Start play on the desired input.
3
Be sure that “TAPE MON” goes off.
For tape monitor function, refer to “TAPE MONITOR
function” on page 14.
Start recording on the VIDEO 1.
2
Select VIDEO 2, VIDEO 3, VIDEO 4 or
VIDEO 5 as a recording source.
1
Start play on the VIDEO 2, VIDEO 3,
VIDEO 4 or VIDEO 5.
3
The audio and video signals from the VIDEO 2,
VIDEO 3, VIDEO 4 or VIDEO 5 will be dubbed onto
the VIDEO 1 and you can enjoy them on the TV set
and from the speakers.
Dubbing from video components onto
VIDEO 1
Recording with TAPE MONITOR
Select CD as an sound recording source.
2
Select VIDEO 2 as a image recording
source.
Example) When dubbing the VIDEO 2 image signal
and the CD sound signal separately onto
VIDEO 1.
1
