Putting the EZX 80 into operation
10 | EZX 80
Putting the EZX 80 into operation
Charging the headset
A complete charging cycle takes about 1 hour and 20 minutes. Before
using the headset for the first time, charge the rechargeable battery for
a complete charging cycle without interruption.
1 Take off the headset and switch it off (see page 14).
2 Connect the smaller plug of the charging cable to the USB socket of the
EZX 80.
3 Connect the USB plug of the charging cable to the USB socket of your
computer.
If you are using the optional charging accessories*: Connect the USB
plug of the charging cable to the power supply unit or to the USB car
charger adapter.
4 The rechargeable battery is being charged.
When charging is complete, the LED goes off.
WARNING
Danger of injury!
Wearing or using the headset during charging can cause burns and
injuries.
̈ During charging, place the headset on a table.
A charging time of ... corresponds to a talk time of ...
approx. 10 min approx. 1 h 30 min
approx. 20 min approx. 2 h 40 min
approx. 40 min approx. 5 h 20 min
approx. 60 min approx. 7 h 30 min
approx. 80 min approx. 10 h
1 2
3 4
100 %
OFF
5 min
*
*
*
only supplied with 3in1 and 2in1 versions
**
only supplied with 3in1 version
*
