A SERVICE OF

logo

3-4 Troubleshooting
2) Turn off the power switch.
3) Open a front cover(rid).
4) Turn on the power switch while turning on “JOURNAL/
SLIP FEED button.
5) Push “JOURNAL/SLIP FEED” button 3 times.
6) Close a SLIP front cover (rid).
7) Following message will be printed on receipt paper and
“SLIP” LED flushes.
8) Peel off the pasteboard portion of a designated point of a
cleaning sheet.
* This procedure, 8) , is required only for a adhesive cleaning
sheet.
Figure 2. Adhesive Cleaning Sheet
******WAVEFORM TRANSMISSION MODE
*****
Please set back
Fi
F
F