Getting Started >>
18
Choosing the Language
Specify in which language menus and messages are to be displayed on the
LCD monitor.
1. Slide the mode switch to [
], [ ] or
[ ], and press the MENU button.
2. Select [Setup] menu with the
button.
3. Select [Language] with the
/ buttons
and press the
SET button.
4. Select the displayed language with the
/ buttons and press the SET
button.
The setting will be stored.
Formatting the Memory Card or Internal Memory
This utility formats the internal memory (or memory card) and erases all stored
images and data.
1. Slide the mode switch to [
], and press
the MENU button.
2. Select [Setup] menu with
button.
3. Select [Format] with the
/ buttons,
then press the
SET button.
4. Select [Execute] with the
/ buttons,
and press the
SET button.
To cancel formatting, select [Cancel]
and press the
SET button.
You should format the memory card before its initial usage or after the
card has been used in another camera or SD card device.
NOTE
