A SERVICE OF

logo

Unit 4: Printer Configuration
GL408-412e Operator Manual
4-10 PN: 9001163A
UNIVERSAL SERIAL BUS (USB) INTERFACE MODE
This chapter provides the programming sequences required for USB interface setup. Use the keys of the printer’s
operator panel to select and enter the required options.
Refer to the Menu Definition Tables in the following chapter to provide an explanation of each menu screen.
Figure 4-7, USB Interface Mode
ATTENTION: Perform the following programming sequence only if this is the interface
type to be used. Instead, refer to the appropriate interface programming chart.
INTERFACES
INTERFACES
Ignore CR/LF
Item No. Check
BCC Check
History Buffer
Comm. Protocol
Host Interface
Parallel Port
USB Port
Serial Port
Printer Mgmt
POWER
ONLINE
OFFLINE
LINE
FUNCTION
Interface
Mode
ENTER
Ignore CR/LF
ENTER
Ignore CR/LF
No*
Item No. Check
Disable*
BCC Check
Disable*
History Buffer
Temporary*
Comm. Protocol
Status 5*
USB Port
Buffer Size in K
Buffer Size in K
1 to 16KB*
Timeout
10 sec*
INTERFACES
USB Port
INTERFACES
Host Interface
Host Interface
Auto Switching*
Host Interface
USB*
Screens
only display if
Admin User is
enabled within
Advanced
Mode