Recording Customized Announcement
1. Follow steps 1 to 4 on the previous page.
2. Highlight Custom and press (right softkey).
3. Highlight Record and press .
ᮣ
If your announcement has already been recorded, select Yes
or No for overwriting.
4. Press to start the 1st recording.
5. After the 1st recording, press again to start the 2nd
recording.
6. To stop recording, wait for 12 seconds or press .
ᮣ
To erase the recorded announcement, select Eraseduring step
3 above.
ᮣ
To play the customized announcement, select Play during
step 3 above.
Options
89
Selecting Announcement for Screen Call
1. Press to access the main menu.
2. Highlight Voice Service and press .
3. Highlight Screen Call and press .
4. Highlight Announcement and press .
5. Depending on your preference,highlight Pre-Recorded
or Custom, and press .
Recording Name for Pre-Recorded Announcement
1. Press to access the main menu.
2. Highlight Voice Service and press .
3. Highlight Screen Call and press .
4. Highlight Announcement and press .
5. Highlight Pre-Recorded and press (right softkey).
6. Highlight Record Name and press .
ᮣ
If your name has already been recorded, select Yes or No for
overwriting.
7. Press to start the 1st recording.
8. After the 1st recording, press again to start the 2nd
recording.
9. To stop recording, wait for 12 seconds or press .
ᮣ
To erase the recorded name, select Erase Name during step 6
above.
ᮣ
To play the pre-recorded announcement, select Play during
step 6 above.
Options
88
