Redialing a 10-4 Call
1. From the 10-4 List, highlight Redial, and press and hold .
ᮣ
You will see 10-4 connecting... followed by the text
“You have floor.”
2. Speak after the beep (keep pressing down while you are
speaking). When you are finished speaking, release the
button to allow others to reply.
3. When you are finished, press .
Note: You can change the volume and the speaker setting while a 10-4
call is activated.
Volume: Adjust the voice volume by using the Side
Volume key or the navigation key up or down except when you are
pressing and holding . This doesn’t affect tone and beep volume.
Speaker: Switch the speaker On or Off by pressing (left softkey).
10-4 Options
When you use 10-4, several user options are available by
pressing (right softkey). To select an option, highlight it
and press .
ᮣ
Copy to copy a contact to the Personal List. Copy Group appears
when you highlight a group. (This option doesn’t appear if
the entry is already in the Personal List or when you select
Personal List/Personal Groups.)
ᮣ
Edit to edit a 10-4 number and/or name. See page 103.
ᮣ
Erase to erase a contact. Erase Group appears when you
highlight a group.
ᮣ
Add Contact to add a new contact. Add Group appears when
you highlight a group list. See page 102 for details.
ᮣ
Erase 10-4 List to erase entries saved in the 10-4 List (except
Company List/Company Groups).
ᮣ
Help to see the 10-4 instruction page.
Options
97
Receiving a 10-4 Call (1-to-1 Call)
1. Make sure your phone’s 10-4 mode is enabled (see “Setting
10-4 Mode” on page 90).
2. When you receive a 10-4 call from a contact, “10-4 Call,” the
contact’s name, and the 10-4 number appear on the display.
(You do not need to take any action to answer the call.)
3. If the person placing the call has kept the floor (held the 10-4
button), you will see the contact name and 10-4 number along
with “has floor.,” and you will hear the caller speaking.
4. When the caller finishes speaking and releases the 10-4
button, you will see “Floor is open.” on the display screen.
Press and hold to take the floor and reply to the caller. (You
will see “You have floor.” and hear a tone confirming that you
may speak.)
5. When the conversation is finished, press .
Receiving a 10-4 Call (Group Call)
1. When you receive a 10-4 call from one of the group members,
“Group Call,” the group member’s name, and the 10-4 number
appear on the display.
2. Continue with the 10-4 call as described above.
3. When the conversation is finished, press .
96
