33
VIDEO MODE
SELECTING VIDEO SYSTEM
If Plasma Monitor cannot reproduce proper video image, it is
necessary to select a specific broadcast signal format among PAL,
SECAM, NTSC, NTSC 4.43, PAL-M, and PAL-N.
PAL / SECAM / NTSC / NTSC4.43 / PAL-M / PAL-N
Plasma Monitor automatically detects incoming Video signal, and
adjusts itself to optimize its performance.
If Plasma Monitor cannot reproduce proper video image, it is
necessary to select a specific component video signal format among
480i, 575i, 480p, 720p, 1035i and 1080i.
Auto
COMPONENT VIDEO SIGNAL FORMAT
VIDEO JACK OR S-VIDEO JACK
Y, Pb/Cb, Pr/Cr JACKS
Plasma Monitor automatically detects incoming Color system, and
adjusts itself to optimize its performance.
Auto
Press MENU button and ON-SCREEN MENU will appear.
1
Press button to select "Setup menu" and then press OK
button. "Setup menu" will appear.
2
Press button to select "Color system".
3
Press button and select Color system.
4
Press MENU button and ON-SCREEN MENU will appear.
1
Press button to select "Setup menu" and then press OK
button. "Setup menu" will appear.
2
Press button to select "Video format".
3
Press button and select Video format.
4
