35
Input the password input in step .
A message screen is displayed.
6
Changing Parental Settings (5)
Switching Between OSD Message Display and Non-Display (1)
Note:
A password can also be input by using the left/right cursor buttons ( , ) to
select numbers at the bottom of the screen and then pressing the enter button
( ).
Press the enter button ( ).
The parental menu screen reappears.
To return to the setup screen, press the return button ( ) or the left
cursor button ( ).
When setup changes are complete, press the setup button ( ).
The screen with “ ” reappears. Press the play button ( ) to begin
play.
5
You can switch between display (On) or non-display (Off) of indicators
(for example, , , , , ) displayed when buttons
are pressed during DVD or video CD play.
Use the up/down cursor buttons ( , ) to select
“” and press the enter button ( ).
The OSD Message setup screen is displayed.
OSD Message
2
Change password
Password has been changed.
This password is necessary
when you change parental setting.
Please remember this password.
Please press “Enter” key.
SetupSetup
5
Follow steps and in “Performing Basic Operations for
Setup Changes” (zsee page 25) to display the setup screen.
1
1 2
