Configuration and function of the Menu settings
24
b Basic operations of the MAIN MENU
1
Press the MENU button.
The PASSWORD input screen is displayed.
2
Press the button 1 four times to enter "1111" and
press the ENTER button.
The MAIN MENU screen is displayed.
•"1111" is the factory default setting password. We
recommend you change the password to avoid
unauthorized use. (P30)
3
Select the menu using the control button ({|}~).
Example: RECORD
4
Press the ENTER button.
The RECORD menu is displayed.
5
Select an item using the control button ({|) and
set the details using the control button (}~).
If a different screen is available for the settings, select
the item, press the ENTER button and set the settings.
6
Press the EXIT/STOP button once operations are
complete.
Press the EXIT/STOP button repeatedly to return to the
live screen.
Memo: The contents of the settings are saved when leaving
the menu setting screen.
Even if the power is turned off the settings content
are retained.
2 2
1 6
5
PASSWORD
- - - -
CH1
2006/07/14 17:25:37
2%
1
CH1
2006/07/14 08:06:09
2%
PASSWORD
* * * *
- - - -
MAIN MENU
RECORDLIVE SYSTEM
HDD SETNETWORK SERVICE
RECORD
RESOLUTION QUAD
CHANNEL CH1
FRAME RATE 1 f/s
QUALITY NORMAL
RECORDING CONTINUOUS
MOTION ZONE FULL ZONE
MOTION SENSITIVITY 7
SENSOR TYPE ---
PRE RECORD ON
POST EVENT RECORD 5 SECONDS
ALARM OFF
ALARM DURATION 5 SECONDS
AUDIO OFF
TIMER SET
RECORD
RESOLUTION QUAD
CHANNEL CH1
FRAME RATE 1 f/s
QUALITY NORMAL
RECORDING CONTINUOUS
MOTION ZONE FULL ZONE
MOTION SENSITIVITY 7
SENSOR TYPE ---
PRE RECORD ON
POST EVENT RECORD 5 SECONDS
ALARM OFF
ALARM DURATION 5 SECONDS
AUDIO OFF
TIMER SET
