13
QuickTips
■
Make sure all cable
connectors are fully
seated on jacks.
■
Always match cables
according to the
colors;
RED for right
audio,
WHITE for left
audio and
YELLOW for
video.
■
AV1 and AV2 jacks
have identical
functions. Any
compatible video
equipment can be
connected to either
set of jacks.
■
A solid Blue screen
with the word Video1
or Video2 displayed
means that the Video
mode is selected, but
no signal is being
detected at the Video
jack. Check connec-
tion, and turn on
external equipment.
■
You may be able to
use the remote
control to operate
your VCR, DVD,
Cable Box, Satellite
Receiver, and TV.
(See pages 7~9.)
■
Position your TV at
least 2 feet from
stereo speakers. The
magnets in the speak-
ers may affect the
picture quality.
■
Do not connect
external speakers
directly to the TV.
Need help?
Visit our website at
www.sanyoctv.com
or Call 1-800-877-5032
USING THE AUDIO/ VIDEO INPUT JACKS
CONNECTING A VCR OR OTHER EXTERNAL EQUIPMENT
Switch off TV and external equipment before connecting cables. (Cables are not supplied.)
1. Connect VCR, DVD, DSS, or other equipment’s Audio Out (R/L) to the TV Audio
Input (R/L)
❶
.
For Mono VCR (Single Audio Jack) connect VCR Audio Out to TV Audio (L) Input.
2. Connect VCR, DVD, DSS, or other equipment’s Video Out to the TV Video Input
❷
.
Optional
Connect VCR, DVD, DSS, or other equipment’s S-Video Out to the TV S-Video In Jacks ➁.
Using the S-Video In jacks overrides the Video In jacks
❷
.
3. Press POWER
❸
to turn on the TV. Turn on external equipment also.
4. Press the INPUT/TV
•VCR key
❹
to select program source: TV signal or signal from the
equipment you have connected to the A/V1 and A/V2 jacks.
Follow the same procedure to connect other compatible video equipment to the second set
of A/V jacks.
❶
BACK VIEW OF VCR
❷
DVD PLAYER
USING THE AUDIO OUTPUT JACKS
CONNECTING A STEREO AMPLIFIER TO AUDIO OUT JACKS
1. Connect the TV Audio Output (R/L)
❶
to the Stereo Amplifier In (R/L)
❷
.
2. Press POWER to turn on the TV. Turn on external equipment also.
3. Use the AUDIO OUTPUT on-screen menu options (see page 12) to select
Fixed or Variable output signal.
Notes: When TV Speakers is in the ON
mode, sound will be produced
through your TV and external
speakers.
When TV Speakers
is in the OFF mode,
sound will be pro-
duced only through
the external speakers.
