Getting Started 9
Activating Your Phone
2. Insert the smaller end of the Travel Adapter
into the charger/accessory connector at
the bottom end of your phone.
Important!: You must unplug the adapter before removing the
battery from the phone during charging to avoid
damage.
Low battery indicator
The battery indicator ( ) in the upper-right corner of the display indicates power
level. Monitor the battery strength and ensure your battery is adequately charged.
• Three bars ( ) indicate a full charge.
• An empty battery icon ( ) indicates a near empty battery.
• A blinking empty battery icon ( ) and a tone sounding indicate you have two to
three minutes before the battery is too low to operate the phone.
If you continue to use your phone without charging its battery, the phone will shut
down.
Activating Your Phone
Contact your Wireless Carrier and follow their instructions for obtaining service, if
necessary. We suggest that you read this guide to fully understand the services your
phone supports.
Install the Battery
Note: Your phone comes packaged with a partially charged rechargeable standard Li-Ion battery and travel
adapter.
Important!: You must fully charge the battery the first time you use your phone, otherwise you could
damage the battery. A fully discharged battery requires up to 4 hours of charge time.
1. Insert the top end of the battery
first, matching the gold contacts
on the inside of the battery to
those on the phone.
