2726
To set the Subtitle Language to your preferred language, follow
these steps. If your preferred language is available on a DVD, your
Subtitle Language will automatically be set to the language you
choose.
1 Open “MENU”
Press the MENU button while the DVD is in Stop mode.
2 Select “DVD”
Use the UP/DOWN buttons to highlight “DVD”, then press the
ENTER button.
3 Select “Language”
Move the selection bar to “Language”, then press ENTER to select.
4 Select “Subtitle”
Highlight “Subtitle”, then press the ENTER button.
5Set “Subtitle Language” Preference
Highlight your preferred language for subtitles, then press the
ENTER button.
Subtitle Language
Subtitle
Subtitle Language
Automatic
If your A/V receiver is equipped with a Dolby Digital decoder, your
DVD-VCR can output Dolby Digital 5.1 sound, but you MUST
enable this feature in the menu system to prevent damage to your
speakers.
NOTE: Select “Bitstream” ONLY if you have connected a Dolby
Digital-equipped A/V receiver to the Digital Output
(optical or coaxial) on the DVD-VCR back panel.
1 Open “MENU”
Press the MENU button while the DVD is in Stop mode.
2 Select “DVD”
Use the UP/DOWN buttons to highlight “DVD ”, then press the
ENTER button.
3 Select “Audio”
Highlight “Audio”, then press the ENTER button.
4 Set “Digital Output”
Highlight “Digital Output” then press the RIGHT button to select
one of the following options:
• PCM - To use your DVD/TV with an A/V receiver without a
Dolby Digital decoder.
• Bitstream – To use your DVD/TV with an A/V receiver with a
Dolby Digital decoder.
Digital Output
PCM Down Sampling : On
PCM
Bitstream
Language : English
Front Display : Auto
Auto Power Off : Off
00215A DVD-V3650/XAA-Eng2 5/29/03 2:45 PM Page 26
