
14 English English 14
You can store up to:
15 FM stations.
1. Select FM by pressing the TUNER/AUX button.
2.
To sear
ch for
a station
Press the TUNING MODE button
Preset
One or more times until PRESET is
displayed. You can search the stored
frequencies in the Preset mode.
Manually
One or more times until MANUAL is
displayed.
You can
search the frequen-
cies one by one in the Manual mode.
3. Select the station to be stored by:
• Pressing t
heTUNING/ALBUM
,
or
.
buttononthe
remotecontroltoselectthepresetstation.
• P
ressandholdtheTUNING/ALBUM
,
or
.
button
ontheremotecontroltoautomaticallysearchforactive
broadcastingstations.
4. Press the MO/ST button to switch between stereo and
mono.
• In a poor re
ceptionarea,selectMONOfora
clear,interference-freebroadcast.
• This app
lies only when listening to an FM station.
5. If you do not want to store the radio station found,
return to Step 3 and search for another station.
Otherwise:
a. Press the ENTER button.
b. Or, press the TUNING/ALBUM button on the
remote control to select a program number.
c. Press the ENTER button to save the preset.
6. To store additional radio frequencies, repeat Steps 3
through 5.
➣
In Tuner mode
• In the Manualmode,youcanusethe
[
or
]
button
onthemainunittomanuallysearchforaradiostation.
• In the Presetmode,youcanusethe
[
or
]
button
onthemainunittosearchforastoredradiostation.
You can listen to a stored radio station.
1. Select FM by pressing the TUNER/AUX button.
2. Press the TUNING MODE button on the remote
control until “
PRESET
” is displayed.
3. Pres
s the [ or ] button on the main unit or the
TUNING/ALBUM , or .
on the remote control to
select a desired preset number.
Selecting a Stored Station
Recording Function
Listening to Radio
You can record from a CD, radio broadcast, or an
external source to a USB storage device.
1. Connect an external USB storage device to the
USB ( ) jack on your product.
2. Play a disc, tune to a station, or connect an
external source to your product.
CD
• Press
theMP3/CDbuttononthemainunittoselect
theCDfunction.
• Press
theOPEN/CLOSE buttontoopenthedisctray.
• Insert
aCDandpresstheOPEN/CLOSE buttonto
closethedisctray.
• Use t
heCDselection(
[
or
]
)buttonstoselectthe
desiredsong.
Tuner
• SelectTUNERbypressingtheTUNER/AUXbutton.
• Tune to a stationyouwanttorecord.
External Source
• Conn
ectanExternalComponent/MP3playertoyour
product.
• Press
theTUNER/AUXbuttontoselect<AUX>input.
• Pla
yasongfromtheexternaldevice.
3. Press the USB REC button to start recording.
CD
• “TRACK RECORDING” is displayedandCD
recording starts.
• Press andholdtheUSB RECbuttontostartrecording
alltracksonthedisc."FULLCDRECORDING"is
displayed.
MP3-CD
•
Press the USB REC button. The currently playing file
is copied onto the USB device.
•
Press and hold the USB REC button. All the files of
the current folder are copied onto the USB device.
• WhenyouconnectaMicrophone,presstheUSB
REC button.Thecurrentlyplayingleisrecordedonto
theUSBdevice,andthesoundfromtheMicrophone
isrecordedtoo.
MP3 RECORDING: "MP3 RECORDING""RECORD"
CD COPY: “CHECK”“START”“COPY XX”“COPY END”
is displayed. When the recording is done, “STOP”
will be displayed.
• If there is a duplicate file name, "FILE EXIST" is
displayed,andthefunctioniscanceled.
Tuner /External Source
• RECORD is displayed
.
4. To stop recording, press the STOP (@) button. The
unit automatically creates and saves recorded files
in .MP3 format (SAM-XXXX.MP3).
5. To rem
ove the USB device safely, press the STOP (@)
button once again.
After recording, a directory named
“RECORDING(DISCxxxx)”(FULL CD RECORDING),
“RECORDING”(TRACK RECORDING), “CD
COPY”(MP3 CD), “MP3 RECORDING”(MP3 CD),
“TUNER RECORDING” or “AUX RECORDING” is
created on your USB device.
• Do not disconnect the USB or the AC Cord during recording as
this may cause damage to the file.
• WMA/MP2 files can be copied but not recorded.
MX-F630B-F730B-ZA-ENG-0201-EQ.indd 14 2013-2-19 9:33:23