English 11
Playing a USB Device
To Delete a File
You can delete a file on your USB device.
1.
Play a file you want to delete.
2.
Press
the DELETE button.
3.
Press
[
or
]
to select YES.
• To canc
el the selection, press the RETURN button
on the main unit.
4.
Press the ENTER button.
The selected file will be deleted.
☛
The NTFS file system is not supported.
To Skip 10 Tracks
Press the +10 or -10 button while in playback
mode.
The unit will skip as many as 10 tracks forward
or 10 tracks back from the current track.
Read through the instructions below before using
a USB device with this unit.
• Some USB devices may not work properly with this
product.
• This product only supports external HDD's that are
formatted in the FAT file system.
• USB 2.0 HDD's should be connected to a separate
power source. Otherwise, the USB 2.0 HDD's will not
work.
• If a USB external storage device is connected to
multiple devices, only the MP3 files in the first HDD
will be played.
• DRM-applied files are not supported. Digital Right
Management restricts unauthorized access to a DRM
file so that the copyright of the file is protected from
piracy.
• Even if the extension of the file is .mp3, the file
cannot be played if it is formatted in MPEG layer 1 or
2.
• Do not use a USB hub. USB hubs are not supported.
• The unit displays only the first 15 characters of an
MP3/WMA file name.
• This device is designed to support removable HDDs
with less than 160GB. Depending on the device, a
removable HDD with 160GB or more may or may not
be supported.
• It can take several minutes for the product to
recognize the files on a USB device.
• USB devices (particularly, USB HDDs) may cause a
delay when moving to the next track.
• With USB devices supporting only USB VER. 1.1, the
unit may access files slowly or may not recognize file
properties.
• In Stop mode, the product will turn off automatically
if there is no USB device connected to the USB jack
for 25 minutes.
Connect an external storage device such as a USB
flash memory or external HDD (Hard Disk Drive)
to the product. You can play files in MP3/WMA
format.
Before you begin!
• Connect the external USB storage device to your
product.
• Select the USB mode by pressing the USB 1 or USB 2
button on the main unit or select USB 1 or USB 2 by
pressing the USB button on the remote control.
• The first track of the first directory plays automatically,
in the following order:
If you select USB 1, USB 1
➝
STOP.
If you select USB 2, USB 2
➝
STOP.
➣
To stop playing
Press the STOP (
@
) button to stop playing.
➣
To remove the USB device
If you press the STOP (
@
) button once again,
you can remove the USB device safely.
☛
Do not connect a USB recharger to the USB
port of this product. You can damage the
product.
To Select a Track from a USB Device
You can select an MP3 file during play.
➣
If you want to move to the previous/next track,
press the [,] buttons briefly.
• The unit moves to the previous/next file within the
directory.
• If you press the
[,]
buttons more times than
the number of the files in the directory, the unit
moves to the next directory.
To Search a Folder Quickly
1.
Press
the TUNING/ALBUM button on the remote
control to move to the previous/next folder.
2.
When the search is done, you will see the
previous/next folder name. The track will start
playing.
To Repeat
1.
Press the REPEAT button.
Each time you press the REPEAT button, the
repeat mode will change as follows:
OFF
➝
TRACK
➝
DIR
➝
ALL
➝
RANDOM
2.
When you want to stop the Repeat function, press
the REPEAT button until "OFF" is displayed.
• OFF: Cancels Repeat Playback.
• TRACK: Repeatedly plays the selected track.
• DIR:
Repeatedly plays all tracks in the selected folder.
• ALL: Repeatedly plays all tracks.
• RANDOM: Plays tracks in random order.
To Use High Speed Search
You can search the desired section quickly during play.
➣
Press the
(
,
)
button.
• Each time you press the button, you will move
backward/forward fast.
☛
Sound does not output in fast playback mode.
