<EXIT> to return.
<EXIT> to return.
of the image.
the image.
side.
Corrects the keystone geometry correction of the Hor. lines
on the upper side.
side.
Corrects the keystone geometry correction of the hor. lines
on the lower side.
backward.
forward.
Top-Bottom (north-south) Adjustments
Top-Bottom and center adjustments affect only the horizontal
lines of the projected image.
To start up the Top-Bottom and center corrections, follow the
next procedure :
Push the control disc up or down to highlight TOP-BOTTOM
(N/S) on the geometry menu and then press ENTER.
Only the green image is displayed while making top-bottom
adjustments. The red and blue images will automatically be cor-
rected in the same manner. Convergence corrections are auto-
matically disabled for the duration of these adjustments.
The following adjustments can be executed
- Horizontal centerline bow
- Horizontal centerline skew
- Top bow
- Top keystone
- Bottom bow
- Bottom keystone
All adjustment are indicated on the screen with the function
name, a bar scale and a number between 0 and 100.
Adjust the next alignments until the vertical lines are straight.
To enter an alignment, push the control disc up or down to high-
light a function and press ENTER to activate this function.
Press EXIT to return.
<EXIT> to return.
