/
/
5. Insert the leading edge of the master
roll under the pressure roller. (1)
6. Return the pressure release lever to
its original position. (2)
● Rotate the spools backward to take up all
slack in the master paper.
7. Press the master cut button to cut the
leading edge of the master roll.
I
Warning: When the master cut button is
pressed, the master roll will rotate. Do not
touch the master roll.
I
8. After the beeper sounds, remove the
cut-off portion of the master roll.
●
Remove the cut-off master paper com-
pletely to prevent master misfeed.
9. Return the original table to its original
position until it stops.
39
