BATTERY REPLACEMENT
-Remove the lamp hood by removing outer rubber ring and unscrewing the four screws in
the reflector housing ring.
-Unscrew the battery cover, pull out the battery and its terminals and replace the 6V
sealed lead-acid battery.
-Replace the battery cover, attach the lamp hood back on securely and tighten the two
loosened screws.
BULB REPLACEMENT:
Description: 12V H4 Double filament Halogen Bulb.
-Remove the lamp hood by removing outer rubber ring and unscrewing the four screws in
the reflector housing ring.
-Lift out the bulb reflector.
-Replace the burned-out bulb with a new one and re-assemble the bulb reflector and lamp
hood.
-Use extreme caution not to touch the new bulb with your fingers as oils from your skin will
create hot spots on the bulb that will lead to its failure.
IMPORTANT: BATTERY DISPOSAL
The Lead Acid Battery contained in this unit should be disposed of properly once it is no
longer going to be used. Some states have specific disposal regulations. Please contact
your local authorities to find out the disposal rules.
