6
Notes:
• ResMed VPAP III ST-A has been designed and manufactured to provide
optimum performance using ResMed vented mask systems. While other
vented mask systems may be used, performance and data outputs may be
affected.
• Not all masks are available in all regions.
Humidifiers
Please refer to the illustrations in section B of the illustration sheet.
A humidifier may be required if you are experiencing dryness of the nose, throat
or mouth. The VPAP III ST-A is compatible for use with the following humidifiers:
• HumidAire 2i™ heated humidifier (B-1)
• HumidAire 2iC™ passover humidifier (B-2)
• HumidAire™ heated humidifier (B-3)
• ResMed Passover humidifier (B-4).
!
WARNING
Only the HumidAire 2i, HumidAire 2iC, HumidAire heated humidifier and
the ResMed Passover are compatible for use with the VPAP III ST-A. Please
refer to Warnings on page 2.
Accessories
Please refer to the illustrations in section C of the illustration sheet.
The following accessories may be purchased separately:
• 3 m air tubing (C-1)
• Medium (52 cm) air tubing for the HumidAire and ResMed Passover
humidifiers (C-2)
• Hypoallergenic air filter.
Note: ResMed regularly releases new products. Please check our website at
www.resmed.com.
