32 Raymarine Satellite TV Systems
Note: (1)
Raymarine does not recommend changing the satellite
information unless advised to do so by the satellite provider.
(2)
Vertical and horizontal polarization applies to regions with linear
polarization only.
Setting the local frequency
LNB systems in regions with circular polarization
* Verification methods ** Power supplying methods
SIGNAL - use only signal level for
tracking.
DVB LOCK - use only DVB lock signal
for tracking.
DVB DECODE - verify satellite using
DVB decoding method for tracking.
DSS LOCK - use only DSS lock signal
for tracking.
AUTO - change voltage to LNB by
IRD voltage.
ONLY 13 V - always supply 13 V to
LNB.
ONLY 18 V - always supply 18 V to
LNB.
1. Press YES to enter set up mode.
2. Press NEXT 3 times to enter the
Local frequency menu.
3. Press YES to set local frequency.
4. Select SINGLE LNB type.
PREV - shows previous LNB type.
SELECT - sets the displayed LNB type.
NEXT - shows the next LNB type.
D7973_1
SETUP MODE?
YES NO
D8646_1
SET SAT PAIR?
PREV YES NEXT
D7996_1
SET LOCAL FRQ?
PREV YES NEXT
D7997_1
LNB TYPE : SINGLE
PREV SELECT NEXT
81258_3.book Page 32 Wednesday, November 8, 2006 2:06 PM
