22
After 4 minutes of continuous transmit, the RAY 210 will emit two warning
tones. If the transmitter remains engaged for an additional minute, or 5 minutes
total, the RAY 210 will automatically disable the transmit operation.
At this time, the RAY 210 will cease transmitting, emit an alarm, and “ot” will
be displayed on the LCD. To return to normal operation, the microphone FIT
switch must be disengaged.
3.3.7 To Transmit and Receive on INTL Frequencies
To transmit and receive on International frequencies, press the [FUNC] and then
the [INTL] key, then select the desired channel. INTL will appear on the display
to indicate International operation.
3.3.8 Selecting a Weather Channel
To select and receive a weather channel, press the [WX] key and then rotate the
channel selector switch to the desired channel (0-9). Refer to the below Table 3-
1 for specific weather channel frequencies. When in the weather mode, the
transmitter is disabled.
Channel Frequency (MHz) Type Traffic Function-Ship to Shore
WX0 163.275 NOAA Weather Receive Only
WX1 162.550 NOAA Weather Receive Only
WX2 162.400 NOAA Weather Receive Only
WX3 162.475 NOAA Weather Receive Only
WX4 162.425 NOAA Weather Receive Only
WX5 162.450 NOAA Weather Receive Only
WX6 162.500 NOAA Weather Receive Only
WX7 162.525 NOAA Weather Receive Only
WX8 161.650 Canadian Weath. Receive Only
WX9 161.775 Canadian Weath. Receive Only
Table 3-1 RAY 210 VHF WEATHER CHANNELS AND FREQUENCIES
