A SERVICE OF

logo

Finger Steering Control Basic Operation Instructions 5
Status LEDs
Green indicates fault codes; red indicates
whether the Finger Steering Control is in
Active Mode or Standby Mode.
Finger Steering Control
Detects the position of the user's finger
and translates that into an executable
command.
Anti-Static Wrist Band and Ground Wire
Safety feature intended to prevent static from
damaging the control.
Active/Standby Switch
Toggles between Active and Standby Modes
and scrolls through drive programs and
actuators.
WARNING!
USE ONLY IN DRY
CONDITIONS
Figure 1. Finger Steering Control Components