66
Data - SNMP Screen
General
Enable SNMP
Use this to enable or disable SNMP as required
Community
Enter the community string, usually either "Public" or "Private".
Access Rights
Select the desired option:
· Read-only - Data can be read, but not changed.
· Read/Write - Data can be read, and setting changed.
Managers
Any Station
The IP address of the manager station is not checked.
Only this station
The IP address is checked, and must match the address you
enter in the IP address field provided.
If selected, you must enter the IP address of the required
station.
Traps
Disable
Traps are not used.
Broadcast
Select this to have Traps broadcast on your network. This
makes them available to any PC.
Send to
Select this to have Trap messages sent to the specified PC
only. If selected, you must enter the IP Address of the desired
PC.
Trap version
Select the desired option, as supported by your SNMP Man-
agement program.
