
23
Appendix
Glossary
➲ Glossary ➞ Appendix of the Operation Manual
Specifications
General
Rated power source ............ 14.4 V DC
(10.8 V to 15.1 V allowable)
Grounding system............... Negative type
Maximum current consumption
................................... 10.0 A
Dimensions (W
✕
H
✕
D):
DIN
Chassis......................... 178
✕
100
✕
165 mm
(7
✕
3-7/8
✕
6-1/2 in.)
Nose ............................. 170
✕
96
✕
16 mm
(6-3/4
✕
3-3/4
✕
5/8 in.)
Weight.................................. 2.9 kg (6.4 lbs)
HDD...................................... 30 GB
Navigation
GPS Receiver:
System.......................... L1, C/Acode GPS
SPS (Standard Positioning Service)
Reception system........ 8-channel multi-channel
reception system
Reception frequency... 1 575.42 MHz
Sensitivity..................... –130 dBm
Position update frequency
................................... Approx. once per second
GPS antenna:
Antenna........................ Micro strip flat antenna/
right-handed helical polari-
zation
Antenna cable ............. 5.0 m (16 ft. 5 in.)
Dimensions (W
✕
H
✕
D)
................................... 33
✕
13
✕
36 mm
(1-1/4
✕
1/2
✕
1-3/8 in.)
Weight.......................... 105 g(0.23 lbs)
Display
Screen size/aspect ratio ..... 7.0 inch wide/16:9
(effective display area: 156
✕
82 mm) (6-1/8
✕
3-1/4 in.)
Pixels .................................... 336 960 (1 440
✕
234)
Type ...................................... TFT active matrix, transmis-
sive type
Color system........................ NTSC
Operating temperature range
........................................... +14
°F to +122 °F
Storage temperature range
........................................... –4
°F to +176 °F
Angle adjustment................ 0° to 21°
(initial settings: 0°)
Audio
Continuous power output is 22 W per channel minimum
into 4 ohms, both channels driven 50 Hz to 15 000 Hz
with no more than 5% THD.
Maximum power output ..... 50 W
✕
4
50 W
✕
2 ch/4 Ω + 70 W
✕
1
ch/2 Ω (for subwoofer)
Load impedance.................. 4 Ω (4 Ω to 8 Ω [2 Ω for 1 ch]
allowable)
Preout max output level/output impedance
........................................... 2.0 V/1k Ω