A SERVICE OF

logo

1998 Feb 23 12
Philips Semiconductors Product specification
3 W mono BTL audio amplifier with DC
volume control
TDA7056AT
For single-end application the output peak current may not exceed 100 mA; at higher output currents the short circuit
protection (MLC) will be activated.
Fig.14 Test and application diagram.
To avoid instabilities and too high distortion, the input- and power ground must be separated as long as possible and connected together as close as
possible to the IC.
(1) This capacitor can be omitted if the 220 µF electrolytic capacitor is connected close to pin 2.
handbook, full pagewidth
positive input
MGM588
5
k
0.47 µF
100 nF
220 µF
R
L
= 16
(1)
ground
DC
volume
control
R
s
V
P
15
4
5
TDA7056AT
7
14
I + i
17I i
STABILIZER
TEMPERATURE
PROTECTION
6
V
ref
+
+
+
1 to 3, 8 to 13,
16, 18 to 20
n.c.