22
The display of SA075 shows » Updating
rmware
SA075 restarts after the rmware is »
updated and is ready for use again.
13 Update SA075
SA075 is controlled by an internal program
called rmware. Newer versions of the
rmware may have been released after you
have purchased SA075.
The software program called Philips Device
Manager can use your computer to check for
rmware updates that are available on the
Internet.
Install Philips Device Manager on your
computer from SA075 or download the latest
version from www.philips.com/support.
Note
Your music les are not affected by a rmware •
update unless you select the option to repair
the device.
Manually verify / update
rmware
1
Ensure that your computer is connected
to the Internet.
2 Connect SA075 to the computer
(see section Connect and charge for
instructions).
3 On your computer, click Start >
Programs > Philips Digital Audio Player
> SA075 Device Manager to launch
Philips Device Manager.
4 Click Update
» Philips GoGear SA075 Device
Manager checks for updates and
installs new rmware from the
Internet, if available.
5 When the display shows Update
completed, click OK.
6 Disconnect SA075 from the computer.
EN
