Access Control 49
Access Control limits viewing of Discs that exceed the limits you set. This
feature will not limit viewing if the Disc manufacturer did not code the Disc.
Philips cannot guarantee the availability of Access Control with all Discs, and
therefore denies any liability associated with unintended watching of Discs.
Make sure your Discs play according to your Access Control settings before
you allow children access to the DVD Recorder.
Change Code
1
Press SYSTEM MENU. may be selected. If it is not, press ;
to select it.
2
Press 9 repeatedly to select , then press :. Access control
will be selected.
3
Press : again, then press the Number buttons to enter your
old four-digit code. When doing this the first time, enter any four
numbers you prefer. You will have to enter the same code, exactly,
twice. This will set your code for the first time.
4
Press 9 repeatedly to select Change code, then press :.
5
Press four Number buttons to enter the new four-digit code.
Then, enter it again - exactly - to confirm it.
6
Press SYSTEM MENU to remove the menu.
DVD
VIDEO CD
• The code may not go into effect
until you activate Child Lock.
(You may have to keep con-
firming the code.) See page 50
to activate Child Lock.
Helpful Hint
