3- 4
1
To simply play a Disc, follow these steps.Additional playback
features are described in the accompanying owner’s manual.
1
Press STANDBY-ON on the front of the Player to turn
on the Player. (
You can turn on the Player by pressing POWER
2
on the remote control only if the
STANDBY-ON
button on
the front of the Player is depressed.)
2
Turn on your TV. Set it to the correct Video In channel.
You should see the Player’s blue screen saver on the TV (if no
Disc is in the Player).
3
Press OPEN/CLOSE on the front of the Player to open the
disc tray.
4
Load your Disc in the tray, with the label facing up. If the Disc
(DVD) is two-sided, make sure the side you want to play is facing
up. Press OPEN/CLOSE again to close the tray.
5
Playback may start automatically. If not, press PLAY B.
If a Disc menu appears, use the 1 234 and OK buttons or the
Number buttons to select features or start playback from a
menu. Follow the instructions in the Disc menu.
6
To stop playing the Disc, press STOP 9.
Region Codes
DVDs must be labeled for ALL regions or for Region 1 in order to play on this Player.You cannot play Discs that are
labeled for other regions. If one of these logos appears on your DVD or its case, it should play on this Player.
Color Systems
Recordings are made according to a color system.The most common color system in the United States is NTSC.
This Player is compatible with NTSC and PAL. Make sure the Discs you play were recorded in NTSC or PAL and your
TV is NTSC or PAL compatible. Look for the color system of the DVD on the DVD or on the Disc case.
Playable Discs
This DVD Player will play the following types of Discs:
DVD
(Digital Video Disc)
Super Audio CD
(Compact Disc
Digital Super Audio)
MP3 files
Audio CD
(Compact Disc
Digital Audio)
Video CD
Super Video CD
CD-R (CD-
Recordable)
CD-RW (CD-
Rewritable)
