20
To return to the Home menu, press
HOME.
Network setup
This chapter shows you how to change the
network setup.
Before you connect the NP1100 to a home
network router:
Ensure that the PC meets the minimum
requirements. (see
‘PC connection
requirements’ on page 24)
You
can choose from two different modes
of connection:
Wireless connectio
n (see
‘Create wireless
connection’ on page 20)
Wired
connection (see
‘Create wired
connection’ on page 20)
Create wireless connection
1 Hold ready your network name and
network password or encryption key.
2 Ensure that your wireless access point or
wireless router is turned on.
3 Ensure that the NP1100 is turned on.
4 On the NP1100, congure the network:
5 Press HOME.
6 Press , then to select [Settings] >
[Network setup] >
[Wireless] > [Search
for networks].
7 Press , then to select network.
Enter encryption key (if required).
8 Select [Automatic] > (Enable Proxy?) [No
(default)].
The NP1100 displays a conrmation
screen
that the settings are saved.
Create wired connection
1 Ensure that the Ethernet port on the PC is
enabled.
•
•
•
•
•
È
Set the date
1 Ensure that the NP1100 is turned on.
2 Press HOME.
3 Select [Settings] > [Date and time].
4 Press or , then to select [Set date].
5 Press or to adjust, then to conrm
the date.
6 Press to return to the previous selection
menu.
To
return to the Home menu, press
HOME.
Set sleep timer
You can select a set time period after which the
NP1100 automatically switches to standby.
The timer offers the following options:
[Off]
[15 minutes]
[30 minutes]
[1 hour]
[1.5 hours]
[2 hours]
1 Ensure that the NP1100 is turned on.
2 Press HOME.
3 Select [Settings] >[Sleep timer].
4 Press to select, then press .
To return to the Home menu, press
HOME.
Set button sound (Clicker)
1
Ensure that the NP1100 is turned on.
2 Press HOME.
3 Select [Clicker sound].
4 Press to select [Enable] or [Disable],
then press
.
5 Press to return to the previous selection
menu.
•
•
•
•
•
•
•
•
EN
