11
MZ-3 / 37 page 11
English
Using the Sound Control
You can also adjust the sound settings exclusively on the
set:
1 Press SOUNDCONTROL once or more to select the
various options:
• once:
display shows DBB OFF;
if DBB is activated, display shows DBB ON and
,
• twice:
display shows DSC status OPTIMAL.
(display shows JAZZ, POP, or CLASSIC and the
respective , or symbol if selected)
• three times:
display shows Incredible Surround (IS) status
IS OFF.
if IS is activated, display shows IS ON and
.
2 For each sound setting, turn the VOLUME control in any
direction to select ON, OFF or DSC options.
3 Press SOUNDCONTROL again to confirm.
• Display shows the next sound setting to the adjusted.
• After the IS setting is confirmed,the display shows
the volume level VOL briefly, before returning to the
current playback display.
Demo mode
• In standby, press 9 on the set for more than 5 seconds.
™ Demo messages scroll continuously across the
display.
• Repeat step to deactivate.
™ DEMO OFF scrolls across the display.
CLOCK
Setting the clock
1 In standby, press CLOCK.
™ The clock digits for the hours and the AM/PM
indication flash 0:00.
2 Turn VOLUME to set the hours: clockwise for hours up;
anti-clockwise for hours down.
3 Press CLOCK again.
™ The clock digits for the minutes and the AM/PM
indication flash 0:00.
4 Turn VOLUME to set the minutes: clockwise for minutes
up; anti-clockwise for minutes down.
5 Press CLOCK to confirm the time.
TIMER
Setting TIMER
• The unit can be used as an alarm clock, whereby the set
is switched on at a set time. The clock time needs to be
set first before the timer can be used.
• During setting, if more than 90 seconds elapses without
a button being pressed the unit quits the timer setting
mode.
1 Press PROGRAM on the set for 2 seconds or more in
standby mode.
™
Display shows TUNER or CD and
˚
flashes
™
Display shows SET CLOCK TIME if the clock has
not been set.
2 Turn VOLUME clockwise.
™
Display sequence shows CD, TUNER, CD...
3 Press PROGRAM (on the set) to confirm source.
™ Display shows ON 0:00, the clock digits for the
hours and the AM/PM indication flash; 0:00 flash.
4 Turn VOLUME to set the hours: clockwise for hours up;
anti-clockwise for hours down.
