Video Mode (cont’d) 35
5
If you selected BRIGHT, STANDARD, or SOFT, you are
finished. Press SYSTEM MENU to remove the menus.Yo u
may want to play a Disc for a few minutes in each setting to decide
which you prefer.
If you selected PERSONAL, you can adjust specific picture
elements for your preference. Go to step 6 to adjust these
items.
6
Press 1 to reselect VIDEO MODE.
7
Press 3 or 4 to choose either BRIGHTNESS, CONTRAST,
or SATURATION.Then, press 2.
8
Press 3 or 4 to adjust the setting you selected, then press
OK. Press 1 to go back and select another picture setting
(BRIGHTNESS, CONTRAST, or SATURATION) as
necessary. Repeat steps 7-8 until the picture appears as you
want it.
• For BRIGHTNESS, choosing a more positive value (+1 to +4)
brightens the color on the screen and seems to add white to the
picture. Choosing a more negative value (-1 to -4) darkens the
colors in the picture. Choose zero (0) for the average setting.
• For CONTRAST, choosing a more positive value (+1 to +4) adds
more contrast or noticeable difference between the black and white
in your picture. Increasing the CONTRAST sharpens the picture.
Choose a more negative CONTRAST value (-1 to -4) to blur the
distinction between black and white in the picture.The picture will
not seem as sharp.
• For SATURATION, choose a more positive value (+1 to +4) to
increase the color in your picture.You will notice in the menu that
as you increase the SATURATION, the blue of the menu is a deeper,
brighter blue. However, to decrease the color in the picture, choose
a more negative value (-1 to -4).As you adjust this in the menu, you
will notice that the menu has the least color at -4, and the picture
seems almost black and white. Choose zero (0) to balance the color.
9
When you are finished, press SYSTEM MENU to remove
the menus.
