English
11
Basic Functions
Switching the system on
● Press ECO POWER STANDBY-ON or
SOURCE (or 2on the remote control).
➜ The system will switch to the last selected
source.
● Press DAB/FM, DISC, USB, TAPE or AUX
on the remote control.
➜ The system will switch to the selected source.
To switch the system to standby mode
● Press ECO POWER STANDBY-ON on the
system (or 2on the remote control).
➜ The volume level, interactive sound settings,
last selected source and tuner presets will be
retained in the player's memory.
To switch the system to Eco-power
standby mode
● Press and hold ECO POWER STANDBY-ON
(y on the remote control) for more than 2
seconds.
➜ The display will go blank.
Power-saving automatic standby
The power-saving feature automatically switches
to standby 15 minutes after a CD playback has
ended and no control is operated.
Adjusting volume and sound
1 Turn the VOLUME control anti-clockwise to
decrease or clockwise to increase volume on the
system (or press VOL -/+ on the remote
control).
➜ The display shows the volume level VOL and
a number from 0-31. “MIN” denotes the
minimum volume level and “MAX” denotes the
maximum volume level.
2 Press DSC on the remote control repeatedly to
select the desired sound effect: FLAT, CLASSIC,
JAZZ, POP or ROCK.
3 Press DBB to switch bass enhancement on or
off.
➜ The display shows if the DBB is
activated.
4 Press MUTE on the remote control to
interrupt sound reproduction instantly.
➜ Playback will continue without sound.
● To activate sound reproduction you can:
– press MUTE again;
– adjust the volume controls.
MCB204_05-Eng 4/18/07, 9:45 AM11
