15
9.2.1 Mode setting
The camera is delivered operating in Mode 1.
In total three modes are available.
Mode 1 = Backlight compensation
Mode 2 = Traffic
Mode 3 = Night (low light mode)
Mode 0 is a non-programmable mode (Default mode) in which factory settings are stored.
9.2.2 Video level setting
The nominal video level setting is 700 mV contrast. Adjustments are possible in +30/-30
steps.
9.2.3 Backlight compensation
Turn on the backlight compensation to improve the image quality when you have a scene
where the background features a high level of illumination.
To adjust the amount of back light compensation the use of the software configuration
tool is needed.
9.2.4 Automatic White Balance
The white balance setting automatically controls the different color components in the
picture to obtain the most natural color reproduction.
Automatic white balance control is provided between 2700 K to 10,000 K.
9.2.5 White Balance Autostore
The white balance autostore automatically adjusts the cameras; white balance & stores this
setting for further use.
9.2.6 Linelock setting
Use this button to select between internal synchronisation and linelock.The camera will
switch to external lock when an external lock source is connected (see 9.2.7-9.2.9)
When DC is supplied, the camera selects internal synchronisation.
14
30 sec.
