Philips HF3451 Manual

A SERVICE OF

next previous

Note: After you have set the time for the rst time, you have to press the ‘set time’ button before you can

adjust the time again. The time on the display starts ashing and arrows appear above and below the

time to indicate that the clock time can be set.

3 Whenyouhavesetthecorrecttime,pressthe‘settime’buttontoconrmthetime(Fig.6).

Thetimeonthedisplaystopsashingandthearrowsdisappear.

Note: If you do not conrm the time, the ashing stops and the arrows disappear after 10 seconds. This

indicates that the time has been set.

The appliance is now ready for use.

Using the appliance

Setting the alarm

When you set the alarm, you choose the light intensity level, the type of sound and the sound level.

The alarm is set when the light ring round the ALARM button burns. The light intensity slowly

increases to the chosen level during the last 30 minutes before the set alarm time. The sound slowly

increases in 90 seconds to the chosen level after the set alarm time.

Setting the alarm time

1 Pressthealarmtimebutton(*)tosetthealarm.(Fig.7)

Thealarmtimestartsashingandtwoarrowsappearaboveandbelowthealarm

time(Fig.8).

2 Usethe%andthe^buttonstosetthealarmtime,i.e.thetimeatwhichyouwishtoget

up.(Fig.9)

3 Pressthebuttonlongertoputthetimeforwardorbackwardmorequickly.

4 Pressthealarmtimebutton(*)againtoconrmthealarmtime.(Fig.7)

Thearrowsdisappearandthealarmtimestopsashing.

Note: If you do not conrm the alarm time, the ashing stops after 10 seconds. This means that the

alarm time has been set.

Setting the sound and the sound level

1 PresstheALARMbutton(Fig.10).

ThelightringroundtheALARMbuttongoeson(Fig.11).

Therstsoundsymbol(radiosymbolforHF3462/HF3461andgentlebeepsymbolfor

HF3451)ashesfor3secondsandthesoundcanbeheard.

2 PresstheALARMbuttonagainifyouwanttoselectanotherwake-upsound.Whenyouhave

foundthesoundyouwanttouse,donotpresstheALARMbuttonagain(Fig.10).

After3seconds,thesymbolofthesoundselectedstopsashingtoindicatethatithasbeen

selected.

Thealarmhasbeensetandcontinuestoworkuntilyouswitchoffthealarmfunction.When

youdothis,thesoundsymboldisappearsfromthedisplayandthelightringroundthe

ALARMbuttongoesout.Seealsosection‘Switchingthealarmonoroff’.

3 Turnthevolumecontrolwheel$tosetthesoundlevel.(Fig.12)

The

$appearsonthedisplay.(Fig.13)

4 Ifyouwantnosoundatwake-uptime,selectlevel0.

Setting the light intensity level

1 Usethelightadjustmentwheel@tosetthelightintensitylevel.(Fig.14)

The

@appearsonthedisplay.

,

,

,

,

,

,

,

,

,

ENGLISH 9