English
17
Functional Overview
Notes:
– First, select the source you wish to control by
pressing one of the source select keys on the
remote control (DISC or TUNER, for example).
– Then select the desired function (
¡
,
O
or
P
for example).
1 SOURCE
– to select the relevant active mode: DISC,
TUNER, TAPE or AUX.
– TUNER: toggles between FM and MW band.
2 DISC MENU (disc mode only)
– to enter or exit the disc contents menu.
3 SYSTEM MENU (disc mode only)
– to enter or exit the system menu bar.
4 5 / 4
– to select movement direction in disc contents
menu/system menu bar.
5 1 / ¡
– to tuner mode, to tune to lower or higher radio
frequency. (1 / ¡)
– in Disc mode, press to fast reverse/forward the
disc.
6 O/ P
– in Disc mode, press to skip to the previous/next
chapter/track.
– in Tuner mode, to select a preset radio station
number
7 PLAY/PAUSE 2;
– to start or interrupt disc playback.
– to resume playback from last stop point.
8 STOP 9
– to stop playing the disc.
9 REPEAT A-B
– to repeat a specific section on a disc.
0 REPEAT
– to select variations of continuous playback.
! SUBTITLE
– to select desired subtitle.
@ AUDIO
– to select the audio channel.
# SLEEP
– to set the sleep timer function.
$ ANGLE
- to select the angles cyclically.
% DIM
– to select different brightness for VFD.
^ DSC
– to select various sound effect.
& POWER 2
– to switch to standby mode.
* Numeric Keypad (0-9)
– to enter a track/title number of the disc.
– to enter a number of preset radio stations.
( VOL +/-
– adjust the volume level.
– adjust key control/ ECHO level in karaoke
mode.
– adjust speakers level in speaker setting mode.
) OK
– to exit or confirm the selection.
¡ GOTO
– to go direct to desired title, chapter or time.
™ PROGRAM
– in disc mode, to program favorite tracks.
– in tuner mode, to program favorite stations.
£ SHUFFLE
– to playback in random mode.
Remote control
ZOOM
DSC
1
&
*
(
)
5
6
¡
£
™
≤
∞
≥
§
•
ª
2
3
4
5
6
7
8
9
0
!
@
#
$
%
^
pg 001-044£≠FWD182_55_Eng 2006.3.16, 4:52 PM17
