A SERVICE OF

logo

Open as PDF
next previous
3
Enjoy
2
Set up
A
Finding the viewing channel
A Press 2 (STANDBY-ON) on this unit to turn it on.
B Turn on the TV. Use the TVs remote control to
select the correct viewing channel.
Note To search for the correct viewing channel,
press the Channel Down button on the TVs remote
control repeatedly (or AV, SELECT,
°
button) until
you see the Video In channel. If you are using a RF
modulator, set the TV to channel 3 or 4.
See the accompanying user manual on ‘Getting started’
for more information.
B
Select the display language on
the screen
A Press SETUP.
The { General Setup Page } appears.
OSD Language English
Sleep Français
Español
- - General Setup Page - -
General AudioVideo
Preference
B Press to select { OSD Language } and press .
C Use  keys to select a language option in the
menu and press OK to confirm.
Note The language set here is only for the menus
that are shown on the TV while operating this unit, not
for the DVD disc menu.
Need help?
User Manual
See the user manual that came with your Philips DVD Player
Online
Register your product and get support at www.philips.com/welcome
Hotline
Call 1-866-771-4018 for our operators.
2008 C Philips Consumer Lifestyle
Philips and Philips Shield are used under license of
Koninklijke Philips Electronics
P&F USA, Inc. PO Box 672768 Marietta, GA 30006
Printed in China
sgptt_0851/F7_03
A
Start disc playback
A Playback may start automatically when a disc has
been loaded in the disc tray.
Note If a disc menu appears on the TV, use
 keys to navigate in the DVD menu.
B Press PLAY/PAUSE
u
to start playback.
C To stop playback, press
STOP
Ç
.
Troubleshooting
For more troubleshooting
tips, see the user manual.
No power
• CheckiftheACpowercordisproperlyconnected.
• PresstheSTANDBY-ONonthetoppanelofthis
unit to turn on the power.
No picture
• CheckconnectiontoTVandensuretheplugsare
rmly in place.
No sound or distorted sound
• Checkaudioconnectionsandmakesurethatthe
connected audio device is turned on.
Remote control does not work
• Checkthebatteriesareloadedcorrectlyorreplace
the batteries with new ones.
• Reducethedistancebetweentheremotecontrol
and this unit.
• PointtheremotecontroldirectlytowardtheIR
sensor.
dvp1013_F7_qsg_eng.indd 2 12/30/2008 5:02:47 PM