/05_8239 210 98393
23
Basic Operations
1 Press SYSTEM MENU in the STOP
mode to enter the Setup Menu.
2 Press OK to enter the next level
submenu or confirm your selection.
3 Press 1 2 to enter the submenu or
return to the previous menu.
4 Press 34 to highlight the desired menu.
5 Press SYSTEM MENU to quit the setup
menu.
➜ The settings will be stored in the
player’s memory even if the player is
switched off.
General Setup menu
The options included in General Setup
menu are: ‘OSD Language’, ‘Screen Saver’,
‘Smart Power’, ‘Disc Lock’, ‘Program’ and
‘DivX(R) VOD’.
Follow the steps below:
SET UP MENU - - MAIN PAGE
AUDIO SETUP
VIDEO SETUP
PREFERENCES
EXIT MENU
GENERAL SETUP
1 Press SYSTEM MENU to enter the
setup menu.
2 Press 3 4 to select the ‘General Setup’
page.
3 Press OK to confirm.
DVD Menu Options
NOTE:
Some of the features in the DVD
Menu Options are described in
“Getting Started”.
Screen Saver
- - GENERAL SETUP PAGE - -
SCREEN SAVER
SMART POWER
DISC LOCK
PROGRAM
OFF
ON
MAIN PAGE
OSD LANGUAGE
DivX(R) VOD
1 Press 34 to highlight ‘Screen Saver’.
2 Enter its submenu by pressing 2.
3 Move the cursor by pressing 34 to
highlight the selected item.
➜ Off: Screen saver is disabled.
➜
On: In STOP or No DISC mode, if no
actions are performed within 5 minutes,
the screen saver will be activated.
4 Press OK, then press 1 to return to
General Setup Page.
Smart Power
When in ‘Stop’ or ‘No Disc’ mode, the
DVD Player will switch to standby mode
after 15 minutes of inactivity for energy
saving.
- - GENERAL SETUP PAGE - -
SCREEN SAVER
SMART POWER
DISC LOCK
PROGRAM
OFF
ON
MAIN PAGE
OSD LANGUAGE
DivX(R) VOD
1 Press 34 to highlight ‘Smart Power’.
2 Enter its submenu by pressing 2.
3 Move the cursor by pressing 34 to
highlight the selected item.
➜ Off: Smart Power is disabled.
➜
On: In STOP or No DISC mode, if no
actions are performed for 15 minutes, the
smart power will be activated.
4 Press OK, then press 1 to return to
General Setup Page.
01-36 DVP630_EU_051 18/03/2004, 10:05 AM23
