16
[EasyLink Setup] • – if this DVD player is
connected to HDMI CEC compliant TV/devices,
all connected devices can respond to the
following commands simultaneously:
Option Description
[EasyLink] Turn off or turn on all EasyLink
features.
To disable this feature, select •
[Off].
[One Touch
Play]
When you press the STANDBY
button, it turns on the TV and
this DVD player, then video disc
play starts (if a video disc is
found in the disc compartment).
To disable this feature, select
•
[Off].
[One Touch
Standby]
When you press and hold the
STANDBY button, all
connected HDMI CEC devices
switch to standby mode
simultaneously.
To disable this feature, select
•
[Off].
Note
Philips does not guarantee 100% interoperability with all •
HDMI CEC compliant devices.
You must turn on the HDMI CEC operations on the TV/
•
devices before you can enjoy the EasyLink controls. See
the TVs/devices manual for details.
Preferences
Note
Stop disc play before you can access to • [Preferences].
Note
This product supports the resolution display of 720p •
and above.
[HDMI Setup]
When you connect this proudct and the TV with an
HDMI cable, select the best HDMI setup that the
TV can support.
• [Resolution] - Select a video resolution that is
compatible with the TV display capability.
Option Description
[Auto] It detect and select the best
supported video resolution
automatically.
[480i], [480p],
[576i], [576p],
[720p], [1080i],
[1080p]
Select a video resolution that
best supported by the TV. See
the TVs manual for details.
Note
If the setting is not compatible with the TV, a blank •
screen appears. Wait for 15 seconds for auto recover or
switch to its default mode as follows:
1) Press ;to open the disc compartment.
2) Press
numeric button ‘1’.
[Wide Screen Format] • – define the wide
screen format for disc play.
Option Description
[Superwide] Centre position of the screen is
stretched less than the side. This
setting is only applicable if the
video resolution is set to 720p
or 1080i/p.
[4:3 Pillar
Box]
No stretching of the picture.
Black bars are displayed on both
sides of the screen. This setting
is only applicable if the video
resolution is set to 720p or
1080i/p.
[Off] Picture will be displayed
according to the format of the
disc.
Note
This setting is only available if you have set the • [TV
Display]
setting to [16:9].
EN
'93BB80BERRNLQGE 30
