English
EN 11
Connect
Connect to digital ampli� er/receiver
DIGITAL IN
COAXIAL
DIGITAL
OUT
1 Connect a coaxial cable (not supplied) to
the COAXIAL/DIGITAL OUT jack on this
DVD player and the COAXIAL/DIGITAL
input jack on the device.
Tip
You can optimize the audio output (see chapter •
‘Adjust settings’ - [ Audio Setup ] > [ Digital Audio
]) for details.
Connect to analog stereo system
AUDIO IN
1 Connect the audio cables (supplied) to the
AUDIO OUT L/R jacks on this DVD
player and the audio input jacks on the
device.
Tip
You can optimize the audio output (see chapter •
‘Adjust settings’ - [ Audio Setup ] > [ Analog Output
]) for details.
Connect USB device
1 Connect the USB � ash drive to the
(USB) jack on this DVD player.
Note
This DVD player can only play/view MP3, WMA, •
DivX or JPEG � les that are stored on such devices.
Press
• to access the content and play the � les.
Connect to power outlet
Warning
Risk of product damage! Ensure that the power •
supply voltage corresponds to the voltage printed on
the back or the underside of the DVD player.
1 Connect the power cord to the power
outlet.
The DVD player is ready to be set up
for use.
1dvp3358K_93_en1.indd 11 4/14/2009 2:34:24 PM
