
19
Preferences
Note
Stop disc play before you can access to •
[Preferences] .
1 Press SETUP .
» [General Setup] menu is displayed.
2 Press to select [Preferences] , then
press
.
3 Select an option, then press OK .
4 Select a setting, then press OK .
To return to the previous menu, •
press
.
To exit the menu, press • SETUP .
[Audio]
Select an audio language for disc play.
[Subtitle]
Select a subtitle language for disc play.
[Disc Menu]
Select a disc menu language.
Note
If the language you have set is not available on •
the disc, the disc uses its own default language.
For some DVDs, the subtitle/audio language •
can only change from the disc menu.
To select the languages that are not listed in •
the menu, select [Others] . Then check the
Language Code list at the back of this user
manual and enter the respective language
code.
Preferences
Audio
Subtitle
Disc Menu
Parental Control
PBC
Mp3 / Jpeg Nav
Password
DivX Subtitle
[TV System]
Change this setting if the video does not
appear correctly. By default, this setting
matches the most common setting for TVs in
your country.
• [PAL] - For PAL-system TV.
• [Multi] - For TV that is compatible with
both PAL and NTSC.
• [NTSC] - For NTSC-system TV.
[TV Display]
Select a display format:
• [4:3 Pan Scan] - For 4:3 screen TV: full-
height display with the trimmed sides.
• [4:3 Letter Box] - For 4:3 screen TV:
wide-screen display with black bars on
the top and bottom of the screen.
• [16:9] - For wide-screen TV: display ratio
16:9.
[Progressive]
If a progressive scan TV is connected to this
product, turn on the progressive scan mode.
• [On] - Turn on progressive scan.
• [Off] - Turn off progressive scan mode.
Note
For more detailed description, see “Get •
started” > “Turn on progressive scan”.
[Picture Setting]
Select a predefi ned set of picture color
settings or customize the personal setting.
• [Standard] - Original color setting.
• [Bright] - Vibrant color setting.
• [Soft] - Warm color setting.
• [Personal] - Customize the color setting.
Set the level of brightness, contrast, tint
and color saturation, then press OK .
English
EN
EN.indd Sec1:19EN.indd Sec1:19 2009-7-29 11:27:492009-7-29 11:27:49