13
4 Select a setting, then press OK.
To return to the previous menu, press
.
To exit the menu, press SETUP.
[TV System]
Change this setting if the video does not appear
correctly. By default, this setting matches the most
common setting for TVs in your country.
[PAL] - For PAL-system TV.
[Multi] - For TV that is compatible with both
PAL and NTSC.
[NTSC] - For NTSC-system TV.
[TV Display]
Select a display format:
[4:3 Pan Scan] - For 4:3 screen TV: full-height
display with the trimmed sides.
[4:3 Letter Box] - For 4:3 screen TV: wide-
screen display with black bars on the top and
bottom of the screen.
[16:9] - For wide-screen TV: display ratio 16:9.
[Progressive]
If a progressive scan TV is connected to this
product, turn on the progressive scan mode.
[On] - Turn on progressive scan.
[Off] - Turn off progressive scan mode.
Note
For more detailed description, see “Get started” >
“Turn on progressive scan”.
[Picture Setting]
6HOHFWDSUHGHÀQHGVHWRISLFWXUHFRORUVHWWLQJVRU
customize the personal setting.
[Standard] - Original color setting.
[Bright] - Vibrant color setting.
[Soft] - Warm color setting.
[Personal] - Customize the color setting. Set
the level of brightness, contrast, tint and color
saturation, then press OK.
Note
[LPCM Output] setting is only available if the [Digital
Output] is set to [PCM Only].
The higher the sampling rate, the better the sound
quality.
[Volume]
Set the default volume level when you play a disc.
1. Press OK.
2. Press
to set the volume.
3. Press OKWRFRQÀUPDQGH[LW
[Sound Mode]
Select a preset sound effect to enhance the audio
output.
[3D] - Select a virtual surround sound effect
that is produced from the left and right audio
channels.
[Movie Mode] - Select a sound effect for
movies.
[Music Mode] - Select a sound effect for
music.
[Night Mode]
Make loud sound level softer and soft sound level
louder so that you can watch the DVD movies at a
low volume, without disturbing others.
[On] - Enjoy quiet viewing at night.
[Off] - Enjoy surround sound with a full
dynamic range.
Note
Applicable only to Dolby Digital encoded DVD.
Video setup
1 Press SETUP.
» [General Setup] menu is displayed.
2 Press to select [Video Setup], then press .
3 Select an option, then press OK.
English
EN
