English
90
Firmware Upgrade
Installing the latest rmware
Periodically Philips will issue upgrades for
the rmware that was initially installed in
your recorder as the rmware is
continuously re ned for greater stability
and compatibility of the recorder.
CAUTION! Power supply must not be
interrupted during upgrade!
Jump forward
System
Setup
mm : ss
Jump back
Version Info
mm : ss
A Get the version information of this
recorder by pressing SYSTEM on the
remote control and select { Setup } >
{ System } > { Version Info } in the
menu.
Write down the information for your
current software version.
B Visit the Philips website ‘www.philips.
com/ support’ to check the availability of
the latest rmware upgrade. Download
the rmware to a CD-ROM.
C Press OPEN CLOSE on the front of
the recorder to open the disc tray.
D Insert the CD-ROM and press
OPEN CLOSE again.
The rmware will start to install on
the recorder automatically.
dvdr9000h_eu_eng2.indd 90dvdr9000h_eu_eng2.indd 90 2005-10-13 9:18:24 AM2005-10-13 9:18:24 AM
