Tape Counter
45
• You may only set the counter to
zero at one location at a time.
Setting the counter to zero at a sec-
ond location will erase the previous
zero setting.
• If you remove the tape, the counter
will reset to zero at the point at
which you last stopped playback
whenever you reinsert the tape.
Helpful Hints
STOP
SLP
1 :23 :45 HIFI
Follow the steps below to reset the VCR’s real-time tape counter
to zero at a tape location you want to refer to later.
1
Press VCR, then play, fast forward, or rewind a tape
to the location that you would like to refer to later.
Press STOP C to stop the tape.
2
Press DISPLAY to see the status display.
3
While the counter is on the screen, press
CLEAR/RESET to reset the counter to zero.
STOP
SLP 0 :00 :00 HIFI
4
When you later want to return to this point on the
tape, press DISPLAY so you can see the counter
(while tape play is stopped). Press h or g.
As the tape rewinds or forwards, watch the counter.When
it reaches zero, press PLAY B to play the tape.
