17
DVD616K IFU for /751 3141 016 18911
OSD language
There are two options available for information
display on TV screen.
1 Press the 34 keys to highlight OSD LANG in
the GENERAL SETUP menu.
2 Enter the submenu by pressing
the 2 key.
3 Move the cursor by pressing the 34 keys to
highlight the selected item.
➜ ENGLISH: OSD information will be displayed
in English.
➜ CHINESE: OSD information will be displayed
in Chinese.
4 Press the OK key to confirm.
5 Press the 1 key to return to the GENERAL
SETUP menu.
Screen saver
This function is used to turn on or off the screen
saver.
1 Press the 34 keys to highlight SCR SAVER in the
GENERAL SETUP menu.
2 Enter its submenu by pressing
the 2 key.
3 Move the cursor by pressing the
34 keys to highlight the selected item.
➜ ON: At STOP mode, if nothing is happened
within 5~6 minutes, screen saver will turn on.
➜ OFF: Screen saver is disable.
4 Press OK to confirm.
5 Press the 1 key to return to the GENERAL
SETUP menu.
Speaker setup page
This menu contains setup options of your speaker
system, such as DOWNMIX,
D.R.C.(Dynamic Range Compression),
Setup Menu
DOWNMIX mode
1 Press the 34 keys to highlight
the DOWNMIX item.
2 Enter the submenu by pressing
the 2 key.
3 Move the cursor by pressing the 34 keys to
highlight the selected item.
0 LT/RT
➜ This item will be used only if your DVD player
is connected to a Dolby Prologic decoder.
Meanwhile, the DVD player can send the output
of Dolby Prologic signals.
0 STEREO
➜ This item will help to downmix the signal of
Dolby Digital into stereo signals directly output
from L/R port.
4 Press OK.
5 Press the 1 key and return to the SPEAKER
SETUP menu.
D.R.C. (Dynamic Range
Compression)
DVD player will compress dynamic range of
sound effect output, when you do
not want to disturb your neighbours and your
famliy during midnight.
1 Press the 34 keys to highlight D.R.C.,
2 Enter the submenu by pressing the 2 key.
3 Move the cursor by pressing the 34 keys to
highlight the selected item.
➜ ON: Enable D.R.C.
➜ OFF: Disable D.R.C.
4 Press OK.
5 Press the 1 key to return to the SPEAKER
SETUP menu.
which gives the setup system to
reproduce
high quality surround sound.
1 Press SYSTEM MENU.
2 Press the 34 keys to highlight the SPEAKER
SETUP item.
3 Press OK to confirm.
4 Move the cursor by pressing the 34 keys to
highlight the selected item.
➜ 100: make the VFD brighter than normal.
➜ 70: standard brightness
➜ 40: make the VFD to dim mode.
➜ OFF: switch off the VFD display.
5 Press OK to confirm.
6 Press the 1 key to return to the GENERAL
SETUP menu.
