13
Making recordings
When your device is not connected to the computer, you can make voice, radio or line-in recordings.
Preparing to make recordings
1 Press SETTING. Select Recordings and press 6 for a list of available settings.
2 You can adjust the following settings before making any recordings.
Record quality Low, Medium, High
Auto volume control On, Off
Silence detection On, Off
Setting Available options (default settings in bold)
Auto volume control (only applicable to voice recording): device will fix the volume level when
making voice recording
Silence detection (only applicable to LINE-IN recording): device will create new track when it detects
a silence period
Making voice recording
1 Make sure you are not in the radio mode.
2 Press REC to start voice recording.
➔ Device shows the recording state.
3 Press REC again to stop voice recording.
➔ Device shows the saving state. Your voice recording will
be saved on your device
(filename = recordings > mic >MIC xxx.wav; xxx = track number).
4 Press 2; to preview your new recording when prompted.
If you do not want to preview, do not press any key. The preview
prompt will time out.
