22 EN
Press POWER .
The alarm timer remains activated.
Press REPEAT ALARM on the main unit.
The alarm call repeats at 9-minute intervals.
Press ALM 1 or ALM 2 on the main unit.
[AL 1] (alarm 1) or [AL 2] (alarm 2) disappears from the display.
The alarm timer is deactivated.
Set the sleep timer
This DC350 can switch to standby automatically after a set period of time.
1 When the DC350 is turned on, press SLEEP repeatedly to select a set period of
time (in minutes).
When sleep timer is activated, the display shows
.
To deactivate sleep timer
1 Press SLEEP repeatedly until “0” is displayed.
When sleep timer is deactivated,
disappears on the display.
Adjust display brightness
1 Press repeatedly BRIGHTNESS CONTROL on the main unit to select:
Bright.
Dim.
Off.
9 Product information
Note
Product information is subject to change without prior notice.•
Specifi cations
Amplifi er
Rated Output Power 2X3W RMS
Frequency Response 125Hz - 16kHz, ±3dB
Signal to Noise Ratio >65dB
Aux Input 0.6 V RMS 10kohm
•
»
•
»
•
»
»
»
»
•
•
•
DC350_12_Book 1.indd 22DC350_12_Book 1.indd 22 11/7/2008 2:05:27 PM11/7/2008 2:05:27 PM
