7
CABLE BOX CONNECTIONS
3
Cable Box (w/Audio/Video Outputs):
This connection will supply Stereo sound.
1
Connect the Cable Company sup-
plied cable to
the cable signal
IN(put) plug on the back of the
Cable Box.
2
Using a RCA type Video Cable, con-
nect one end of the cable to the
Video (or ANT, your cable box may
be labeled differently) Out jack on
the cable box and the other end to the
AV1 Video Input on the TV.
3
Connect one end of the Audio Left
and Right Cable to the left and right
Audio Out L & R jacks on the
cable box. Connect the other end to
the AV1 Audio L & R Input jacks on
the TV.
NOTE: Use the Channel + or – buttons on
the TV remote control to tune to the AV1
channel for the cable box signal. Once
tuned, change channels at the cable box,
not the television.
