English
11
AZ 1150 /17
page 11
General operation
1 Press the POWER button.
2 To select sound source, press SOURCE
once or more.
3 Adjust the sound with the VOLUME and
ULTRABASS 2 controls.
➜ Volume level is briefly shown as a
number 0-32, during volume adjustment.
The volume bar is shown during
operation.
➜ ULTRABASS 2 indicator lights up
when activated.
MUTE: AZ1155 model only
• Press MUTE on the remote control to
interrupt sound reproduction instantly.
➜ Playback continues without sound.
• To reactivate sound reproduction you can:
– press MUTE again;
– adjust the volume controls;
– change source;
4 To switch off the set, press POWER.
Note:When the set is switched off, the set's
memory will retain:
– the tuner presets;
– the sound settings and up to volume level
20 (maximum).
Tuning to Radio Stations
1 Press the POWER button.
2 Press SOURCE once or more to select
TUNER.
➜ Display: shows waveband, frequency /
and preset station number if already
stored.
3 Press BAND once or more select the
desired waveband.
4 Tuning to stations: you can tune to your
stations manually or by automatic search
tuning:
Automatic search tuning:
• Gently turn and hold the ROTARY
NAVIGATION ring anti-clockwise or
clockwise to ¡ or ™ , and release when
the frequency in the display starts to
change.
➜ The radio automatically tunes to a
station of sufficient reception. Display
shows Sr ch during automatic tuning.
.
