A SERVICE OF

logo

Open as PDF
next previous
15
•
•
o STANDBY: TV will be automatically switched to STANDBY mode (even if the last status was ON) whenever the mains
power is turned ON or resumed after a power interruption.
o ON: Similar function as “FORCED ON” but the remote control STANDBY key function is enabled when TV is set to
this mode.
VOLUME INDICATOR: To display volume indicator when adjusting volume, select “YES”.
Select “NO” to hide the volume indicator.
CHANNEL DISPLAY: CHANNEL DISPLAY values can be: NUMBER, LABEL, ALL, and NONE.
SWITCH ON/OSD
WELCOME MESSAGE
SWITCH ON CHANNEL
SWITCH ON VOLUME
SWITCH ON PIC FMT
POWER ON
VOLUME INDICATOR
CHANNEL DISPLAY
>
AV
30
WIDESCREEN
LAST STATUS
YES
ALL
PICTURE/SOUND
BRIGHTNESS
COLOUR
CONTRAST
SHARPNESS
TINT
ACTIVE CONTROL
TREBLE
BASS
BALANCE
AVL
50
50
50
50
50
YES
50
50
50
ON
CONTROL
ESP
AUDIO/VIDEO MUTE
STEP TUNING
DIGIT TIMEOUT
MIN VOLUME
MAX VOLUME
OFF
NO
NO
3.0
0
99
SECURITY
SECURITY
KEYBOARD LOCK
REMOTE CONTROL LOCK
VIDEO OUT MUTE
ENABLE GUEST MENU
ENABLE TELETEXT
STANDARD
NO
NO
NO
YES
YES
Picture and Sound settings
TREBLE/BASS: Adjusts the level of treble and bass effects on the TV’s sound output.
BALANCE: Adjusts the balance of the right and left speakers to best suit your listening position.
AVL (Automatic Volume Leveller): Limits the increase in sound level especially during programme change or advertising
slots.
•
•
•
Security settings
KEYBOARD LOCK: Disables the television’s local keyboard for volume and program control.
REMOTE CONTROL LOCK: Locks all buttons on the guest remote control.
VIDEO OUT MUTE: Disables video out signal from all sources.
ENABLE GUEST MENU: Enables the Guest Menu.
ENABLE TELETEXT (only if applicable) : Enables Teletext.
SWITCH ON/OSD
WELCOME MESSAGE
SWITCH ON CHANNEL
SWITCH ON VOLUME
SWITCH ON PIC FMT
POWER ON
VOLUME INDICATOR
CHANNEL DISPLAY
>
AV
30
WIDESCREEN
LAST STATUS
YES
ALL
PICTURE/SOUND
BRIGHTNESS
COLOUR
CONTRAST
SHARPNESS
TINT
ACTIVE CONTROL
TREBLE
BASS
BALANCE
AVL
50
50
50
50
50
YES
50
50
50
ON
CONTROL
ESP
AUDIO/VIDEO MUTE
STEP TUNING
DIGIT TIMEOUT
MIN VOLUME
MAX VOLUME
OFF
NO
NO
3.0
0
99
SECURITY
SECURITY
KEYBOARD LOCK
REMOTE CONTROL LOCK
VIDEO OUT MUTE
ENABLE GUEST MENU
ENABLE TELETEXT
STANDARD
NO
NO
NO
YES
YES
•
•
•
•
•
In this sub menu, the Picture and Sound settings of the TV can be selected.
BRIGHTNESS: Changes picture brightness.
COLOUR: Changes the intensity of the colour.
CONTRAST: Changes the difference between the light and dark
tones.
SHARPNESS: Adjusts to improve detail.
TINT: Adjusts the colour balance in an image.
ACTIVE CONTROL: Allows adjustment for picture noise reduction.
Notes:
COLOURandSHARPNESSarenotavailableinthePCmode
•
•
•
•
•
•
•
In this sub menu, the Security settings of the TV can be congured.
SECURITY: The “SECURITY” function allows the user to select one
of two states - “HIGH” or “STANDARD”.
The default is “STANDARD”.
o When the set is in the SECURITY HIGH mode, the SETUP menu
can only be accessed by a Institutional Set-up Remote Control.
o When the set is in the SECURITY STANDARD mode, the SETUP
menu can be accessed with a guest remote control by a sequence
of commands (3 1 9 7 5 3 MUTE).
•