Bilingual broadcast
4 Press the key e repeatedly to select language f or g when the TV channel
broadcasts in 2 languages, dubbed or original language (e.g. Eurosport) or to
select analogue or digital when your set is equipped with Nicam and the TV
channel broadcasts in digital sound.
5 Dual f or g appears briefly on the screen.
The setting is stored in the memory for the selected TV channel when
switching to another TV channel or to standby.
You can select Dual for each TV channel separately.
Information on screen
After the selection of a TV channel or a programme from a peripheral or after
pressing the key
J the following information may appear briefly or
continuously on your screen :
• the programme number and name of the selected TV channel
• information from the broadcaster in a bar at the bottom of the screen
(e.g. the name of the TV channel, the programme title or another message)
• Digital Sound available if the TV channel transmits digital sound and if
your set is equipped with Nicam
• the currently selected sound mode if the TV channel transmits stereo or
digital sound (not with a programme from a peripheral or coming from a
decoder)
• Dolby Pro Logic when this surround mode is activated by the broadcaster
and when the selected sound mode is not mono or analogue
•
c Sound muted when the sound is temporarily interrupted
• the name of the pip connection if PiP is switched on.
See Pip, Picture in Picture, p. 30
• Dual
f or g in case of bilingual broadcast
• the input quality of the selected peripheral connected to a euroconnector:
Y/C (S-VHS-quality), CVBS (normal picture quality), RGB (improved picture
quality, eg. from a CD-i, Photo CD,...)
• the selected DNR setting (see p. 28)
• the selected picture format.
Select previous programme
4 Press the 2 key.
5 The previously selected TV channel is displayed.
